Test gluing: risks of shortages and defects

Sometimes the wallpaper has hidden defects that become visible only after pasting. Therefore, before fully covering the walls, it is recommended to glue only 2-3 strips for checking. This allows you to assess the quality of the wallpaper: shade, texture, presence of visual defects, such as stains or separations. If you have already pasted all the wallpaper and discovered a defect, it will be more difficult and expensive to change the situation.
Additional tip: Always check the article number and batch number of the rolls, as even small differences can affect the final result.

Using low-quality glue: how to avoid separations and poor adhesion
Incorrectly selected glue can leave separations, especially at the joints. It is important to use glue that corresponds to the type of wallpaper, for example, a special glue for non-woven or vinyl wallpaper. High-quality glue should hold the canvas well and ensure uniform gluing without spots and traces.
Additional tip: Check the consistency of the glue and always follow the instructions on the package to avoid sticking problems.

Replacing the roller with a cloth: air bubbles and non-uniform gluing

The cloth does not provide the necessary pressure, and air bubbles can remain under the cloth. The use of a special roller for wallpaper guarantees an even distribution of pressure, removing air and helping the wallpaper to adhere more tightly to the wall. This is important to avoid defects in the form of an uneven surface or small bubbles.
Additional tip: Apply the roller in even strokes from the middle of the strip to the edges to release air and ensure a smooth surface.

Ignoring reverse gluing: effect on visual effect

Most rolls of wallpaper have markings on the direction of gluing - standard or reverse. If these marks are ignored, the final result may appear with inconsistent shades. When reverse gluing, you need to alternate the direction of each canvas to ensure uniform color and avoid visible seams.
Additional advice: Before starting, pay attention to the instructions for the roll and plan rotation, if it is provided by the manufacturer.

Dragging wallpaper: separation at the joints after drying
When gluing, it is important not to stretch the wallpaper excessively, because after drying it can shrink and form tears at the seams. The wallpaper should lie without tension, and the glue should ensure their tight fit.
Additional tip: Apply the glue evenly, following the recommended technique, to avoid gaps at the joints.

Ignoring the drawing: violation of the integrity of the design
Wallpaper with a pattern requires accurate selection so that each element of the pattern is correctly combined at the joints. This is especially true for geometric and large patterns, where any violation will be noticeable. Incorrect selection of the pattern violates the integrity of the room design.
Additional tip: Plan the layout of the canvases and the cutting of the rolls so that the picture remains intact on the entire wall.